View XN06534_334729.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Composite Transistors
XN06534 (XN6534)
Silicon NPN epitaxial planer transistor
For high-frequency amplification
2.90+0.20 -0.05 1.90.1 (0.95) (0.95) 4 5 6
1.50+0.25 -0.05 2.8+0.2 -0.3
Unit: mm
0.16+0.10 -0.06
G
3
2
1
(0.65)
0.30+0.10 -0.05 0.50+0.10 -0.05
I Absolute Maximum Ratings
Parameter Collector to base voltage Rating Collector to emitter voltage of Emitter to base voltage element Collector current Total power dissipation Overall Junction temperature Storage temperature Symbol VCBO VCEO VEBO IC PT Tj Tstg
(Ta=25C)
Ratings 30 20 3 15 200 150 -55 to +150 Unit V V V mA mW C C
1 : Collector (Tr1) 2 : Base (Tr1) 3 : Collector (Tr2)
4 : Base (Tr2) 5 : Emitter (Tr2) 6 : Emitter (Tr1) EIAJ : SC-74 Mini6-G1 Package
Marking Symbol: 7F Internal Connection
6 5 4 Tr1 1 2 3
Tr2
I Electrical Characteristics
Parameter Collector to base voltage Emitter to base voltage Forward current transfer ratio Forward current transfer hFE ratio Base to emitter voltage Common emitter reverse transfer capacitance Transition frequency Noise figure Power gain
*1
(Ta=25C)
Symbol VCBO VEBO hFE hFE (small/large)*1 VBE Cre fT NF PG Conditions IC = 10A, IE = 0 IE = 10A, IC = 0 VCB = 6V, IE = -1mA VCB = 6V, IE = -1mA VCB = 6V, IE = -1mA VCB = 6V, IE = -1mA, f = 10.7MHz VCB = 6V, IE = -1mA, f = 200MHz VCB = 6V, IE = -1mA, f = 100MHz VCB = 6V, IE = -1mA, f = 100MHz 450 min 30 3 40 0.5 0.99 720 0.8 650 3.3 24 1 mV pF MHz dB dB 260 typ max Unit V V
Ratio between 2 elements
Note) The Part number in the Parenthesis shows conventional part number.
0 to 0.1
1.1+0.3 -0.1
G
1.1+0.2 -0.1
I Basic Part Number of Element
2SC2404 x 2 elements
10
5
G
Two elements incorporated into one package. Reduction of the mounting area and assembly cost by one half.
0.40.2
I
Features
1
Composite Transistors
PT -- Ta
500
XN06534
IC -- VCE
12 Ta=25C IB=100A
10 12 VCE=6V Ta=25C
IC -- I B
Total power dissipation PT (mW)
Collector current IC (mA)
8
80A
Collector current IC (mA)
400
10
8
300
60A 6 40A 4 20A 2
6
200
4
100
2
0 0 40 80 120 160
0 0 4 8 12 16
0 0 40 80 120 160
Ambient temperature Ta (C)
Collector to emitter voltage VCE (V)
Base current IB (A)
IC -- VBE
30 100
VCE(sat) -- IC
Collector to emitter saturation voltage VCE(sat) (V)
VCE=6V IC/IB=10 360
hFE -- IC
VCE=6V
25
25C Ta=75C -25C
30 10 3 1 0.3 25C 0.1 0.03 0.01 0.1 Ta=75C -25C
Forward current transfer ratio hFE
300
Collector current IC (mA)
20
240 Ta=75C 25C 120 -25C
15
180
10
5
60
0 0 0.4 0.8 1.2 1.6 2.0
0.3
1
3
10
30
100
0 0.1
0.3
1
3
10
30
100
Base to emitter voltage VBE (V)
Collector current IC (mA)
Collector current IC (mA)
fT -- IE
1200 120
Zrb -- IE
Common emitter reverse transfer capacitance Cre (pF)
2.4
Cre -- VCE
VCB=6V f=2MHz Ta=25C IC=1mA f=10.7MHz Ta=25C
Reverse transfer impedance Zrb ()
VCB=6V Ta=25C
Transition frequency fT (MHz)
1000
100
2.0
800
80
1.6
600
60
1.2
400
40
0.8
200
20
0.4
0 -0.1 -0.3
-1
-3
-10
-30
-100
0 -0.1
-0.3
-1
-3
-10
0 0.1
0.3
1
3
10
30
100
Emitter current IE (mA)
Emitter current IE (mA)
Collector to emitter voltage VCE (V)
2
Request for your special attention and precautions in using the technical information and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company.
Please read the following notes before using the datasheets
A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited.
2001 MAR

▲Up To Search▲

Price & Availability of XN06534

	To Download XN06534 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .